corrugated roll forming machine for sale
This corrugated roll forming machine is the special roll forming machine for steel sheet cold-form industries. It can continuous form the steel sheet according to customer’s requirement, automatically cut to length. This equipment has many advantages, like high forming speed, low noise, stable transmission, easy operation, good look and so on.
User parameters: the number of sheets, the length of the first section, distal, pitch, number of sections, pre-press section, and so on.
The corrugated roll forming machine, in particular to a corrugated plate coiling and forming machine. The corrugated plate coiling and forming machine comprises a base plate, an overturning machine frame and a fixing machine frame, wherein the overturning machine frame and the fixing machine frame are fixedly installed at the two ends of the base plate. One side of the overturning machine frame is connected with an overturning oil cylinder. An upper roller and a lower roller are installed on the overturning machine frame and the fixing machine frame and are perpendicular to each other. An upper hydraulic motor is arranged at one end of the upper roller. A lower hydraulic motor is arranged at one end of the lower roller. The upper roller and the lower roller are both corrugated. According to the structure, the upper roller and the lower roller which are designed to be corrugated are used for combining a corrugated plate forming die and a coiling machine, and the hydraulic motors and an electric appliance cooperate through a numerical control machine tool so that a qualified product can be machined; operation is easy, use is convenient, production efficiency is high, manufacturing cost is low at the same time, and the corrugated plate coiling and forming machine is the preferred machine tool for corrugated forming products.
- Components of line:
| No. |
Name |
Unit |
Qty |
| 1 |
Decoiler |
set |
1 |
| 2 |
Main Machine for roll forming |
set |
1 |
| 3 |
Control System(PLC) |
set |
1 |
| 4 |
Pressing System |
set |
1 |
| 5 |
Cutting System |
set |
1 |
| 6 |
Output Table |
set |
1 |
Technical Specification
1.Manual Uncoiler:
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm
2.Feeding Table:
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3.Main Roll Forming Machine:
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatGlazed Tile Roll Forming Machinement towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
4.Hydraulic System:
Computer Control Cabinet
Power:5.5kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:EURA
5.Shearing Mechanism:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6.Output Table:
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
If you want to know more information you can send to my email [email protected]
You also can visit our main page cold roll forming machine
اللغة العربية